Long Time Member First Time Posting

[ma.racing]

very nice truck man and get some mods to suport that cam a fully bolted lm7 with a cam and a tune shoud run 13s witch would atlest be 7 sec 8ths i no i ran 13.669 and 7.3 in the 8th with like 2.5 60s i had no traction at all and that was without the no2

[randomhero]

very nice truck man and get some mods to suport that cam a fully bolted lm7 with a cam and a tune shoud run 13s witch would atlest be 7 sec 8ths i no i ran 13.669 and 7.3 in the 8th with like 2.5 60s i had no traction at all and that was without the no2

Don't forget you have a regular cab. Also did you mean 8.3 in the 1/8th? A 7.3 is good for a mid to low 11 second 1/4 mile. I have a good list of supporting mods for the truck. The trap speed is definitely there. I'm going to the 1/8th mile track again this weekend with a few suspension mods and hopefully I'll hit a mid 8.5 and a 7.99999 on nitrous.

Welcome..Cool truck, what gear r u running & how much spray u gonna use..?

Full mods list is:
Comp 224/224 on 112 lsa
SS3600 Yank Converter
Fully built transmission with vacuum modulated shifts
Pacesetter Longtubes
Pacesetter ORY
E-Fans
PLX Wideband
EFI Live(I tune myself)
Intake
Hooker Aerochamber
3.73 gears
42# injectors
Detroit True Trac
TA Rear Girdle

I also have a set of 26x11.5x16 e/t streets that so far haven't helped me much at all

The nitrous setup is pieced together:
HSW Plate Kit
Nitrous Express Solenoids
Nitrous Express Purge Kit
Nitrous Express FPSS
MSD Window switch
This is ff_jeff's old kit so hopefully it works well for me

What I have of the turbo setup I'm building:
T61 precision turbo(should make 500 with almost no lag)
KBRacing Hot Parts
KBRacing Intercooler setup
Tial 38mm BOV
Tial 50MM BOV
ZO6 Cam
Just need a few little things and I want to do the 4l80e swap before I install it.