I'll be sure to post up track times when I get around to running itOriginally Posted by Lsx10
I'll be sure to post up track times when I get around to running it
what are your supporting mods?I'll be sure to post up track times when I get around to running it
s10 with 4l60e and cammed 5.3 on the road!THREAD
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.".
Full bolt ons, 4.11s w/ truetrac, Circle-d 9.5" 4000 stall, built trans.
I still think you would be better off with a tr220 or custom grind. I also wouldn't go to a cam that large without porting the heads and raising compression. but I am no expert and I wish you the best. and I have to give you props for the high stall to match the large cam.
s10 with 4l60e and cammed 5.3 on the road!THREAD
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.".
I actually got the cam to match the high stall. It ran good with the smaller cam too. Ran an 8.3 with a conservative tune with the 216/220.
I do plan on getting the heads milled and having them ported/valve job. Would like 10 or 10.5:1 cr, but that will be later this year.
This cam isn't that big..
Posting Permissions
Reply With Quote
