Valve noise!

[farmtruc]

Sounds normal and noisey. From the vid, nothing sounds out of place, just loud.

[RedHeartbeat]

Yep, sounds like every LSx high lift cam swap I've ever done.

[polos954rr]

Chatter Box. You'll get it worked out.

[nonecktribe]

sounds normal dale...mine makes a lot of valve noise also but everything is torqued down correctly and nothing is broken so i have to go with wut greg said

[COWL327]

Yeah...its getting better or i am gettin used to it.My dumbass used the advanced keyway on the timing chain so i have to pull it down and fix that....but Ill get it figured out and then tune it some more.I may even go SD tuned later on.It quits pulling uptop...around 5700 just makes noise!cant beleive I did that after talking to everybody about the cam timing!Started getting sick about halfway thru the job and started running a fever.Made alot of mistakes after that point.

[blazedchevy]

Yeah...its getting better or i am gettin used to it.My dumbass used the advanced keyway on the timing chain so i have to pull it down and fix that....but Ill get it figured out and then tune it some more.I may even go SD tuned later on.It quits pulling uptop...around 5700 just makes noise!cant beleive I did that after talking to everybody about the cam timing!Started getting sick about halfway thru the job and started running a fever.Made alot of mistakes after that point.

hay i got that same cam in my build,the last two builds i did with bigger cams they sounded like i had a solid in it but that is normal.Just check your rocker arms one more time make sure there at 22lbs.Also +4 dgrees adv,i know you said you messed up crap happens i put mine in straight up,they tell you to put it in at 110 instead of 112 thats what got mine in.And it pulls hard all the way up to 7000rpm good luck