Is this where the cool kids hang out?

[molitor]

You said your selling some stuff. What you planning on selling?

all sorts of goodies man, i have 2 sets of oem 1.7 ratio rockers, 1 set of 1.75 ratio rockers that i got from a guy who ran them without assmebly lube. little scratched in the cups, i'm gonna take a swing at polishing them out. i have two sets of oem pushrods, which, unless you really want these, they're useless if you put in a cam, they bend like a twizzler. i have a used front cover with a newish (67k miles) crank seal. 2 oem LS1 cams. (1725) suffix, this is the cam for a 5.7l ls1. and i have a nasty loper that i bought from another member. 220 degree\ .590ish lift cam. need some major valve springs.
and some used but not too severely used lifters. for the most part, i've bought alot of grab bag type deals to get specific parts. and i have alot of stuff left over. oh yeah! the two LS1 cams. . . Brand new, never even installed.

[WARLOCK]

all sorts of goodies man, i have 2 sets of oem 1.7 ratio rockers, 1 set of 1.75 ratio rockers that i got from a guy who ran them without assmebly lube. little scratched in the cups, i'm gonna take a swing at polishing them out. i have two sets of oem pushrods, which, unless you really want these, they're useless if you put in a cam, they bend like a twizzler. i have a used front cover with a newish (67k miles) crank seal. 2 oem LS1 cams. (1725) suffix, this is the cam for a 5.7l ls1. and i have a nasty loper that i bought from another member. 220 degree\ .590ish lift cam. need some major valve springs.
and some used but not too severely used lifters. for the most part, i've bought alot of grab bag type deals to get specific parts. and i have alot of stuff left over. oh yeah! the two LS1 cams. . . Brand new, never even installed.

PM Sent.