+ Reply to Thread
Page 3 of 4 FirstFirst 1 2 3 4 LastLast
Results 21 to 30 of 34

Thread: new times for the stepside

  1. #21
    ff_jeff Guest
    great times buddy.
    I forgot what your setup was.
    ANd how much does it weigh? I wonder if mine weighs the same?

  2. #22
    Join Date
    Jul 2008
    Location
    McAlester,OK
    Posts
    234
    just a 92 gmc stepside with an lq4 6.0 ls1 241 heads cam built 4l 60 with 3000 stall and a 150 wet shot on a plate.im really not sure what it weighs. im mite swing by the scrap yard tommorow and c if they cant weigh it with me in it. what do u think urs weighs

  3. #23
    ff_jeff Guest
    I have heard 3800lbs without driver.
    Have you done any passes on motor yet? Thats about the setup that im looking for untill I go turbo l8r this year or next year.

  4. #24
    Join Date
    May 2008
    Location
    Crowder, OK
    Posts
    8,005
    Quote Originally Posted by ff_jeff View Post
    I have heard 3800lbs without driver.
    Have you done any passes on motor yet? Thats about the setup that im looking for untill I go turbo l8r this year or next year.
    12.6

    1969 Chevy RCLB C10 350/TH400 SOLD
    2007 Chevy RCSB 4.8 4x4 LS SOLD
    2008 Chevy RCSB 5.3 4x4 LT SOLD
    2010 Chevy CCSB 6.2 4x4 LT SOLD
    2005 GMC CCLB DRW 6.6 Duramax 4x4 191,000 and counting
    2013 FORD CCSB F350 6.7 Powerstroke 4x4


  5. #25
    Join Date
    Jun 2007
    Location
    Ocala, Fl
    Posts
    257
    Quote Originally Posted by DINK View Post
    . what do u think urs weighs
    ive had mine on digital scales, it weighed in at 3980 with me in it and im 200lbs. im also iron heads and block. that was with no front bumper or rear bumper. and full interior gutted with alum dash and door panels, a 6 point and some huggggge ford aerostar seats(lets not go there, i dont have the money for brakcets for my kirkey alum seats ive had sitting around for months).

    you have lighter motor, lighter seats lol, no 6 point, and no a/c or heater stuff inside, besides that i still have powerr lock and windows. your stepside also weighs more im gonna guess your right around 3850 to 3950 without you in it.

    96 c1500, stock suspension, stock bottom end, 93 octane, street radial- 1.60 11.5 at 115- on the small stage-sold
    05 SSS 2wd 228/230/80e/fti4k/5,5drop/215shot-sold
    90 350ss... beast build

  6. #26
    Join Date
    Dec 2003
    Location
    Newark, Tx.
    Posts
    1,303
    Quote Originally Posted by DINK View Post
    just a 92 gmc stepside with an lq4 6.0 ls1 241 heads cam built 4l 60 with 3000 stall and a 150 wet shot on a plate.im really not sure what it weighs. im mite swing by the scrap yard tommorow and c if they cant weigh it with me in it. what do u think urs weighs
    Dink, when I had it, I weighed it with the v-6, rear bumper, full size spare, a floor jack in the back, and me in it and it was 4230. I'd guess you are around 3900 the way it sits.
    Did you leave the little spring brackets on the leafs? The SOB dead hooks out of the hole doesnt it.
    You still have the 50's on the front? I was always planning on a smaller tire up front and maybe take the sway bar off. It already transfers great, but I was hoping it may make me a little quicker.
    '92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
    http://videos.streetfire.net/video/d...d700c6401f.htm
    New project: '00 S-10 ext. cab, ZQ8, 370, T-56, daily driver.

  7. #27
    Join Date
    Jun 2007
    Location
    Ocala, Fl
    Posts
    257
    sweet vid in your sig trt, what did it have a ls1 back then and a 6.0 now?

    does that truck lift the wheel at all?

    96 c1500, stock suspension, stock bottom end, 93 octane, street radial- 1.60 11.5 at 115- on the small stage-sold
    05 SSS 2wd 228/230/80e/fti4k/5,5drop/215shot-sold
    90 350ss... beast build

  8. #28
    Join Date
    Jul 2008
    Location
    McAlester,OK
    Posts
    234
    Quote Originally Posted by trtturbo View Post
    Dink, when I had it, I weighed it with the v-6, rear bumper, full size spare, a floor jack in the back, and me in it and it was 4230. I'd guess you are around 3900 the way it sits.
    Did you leave the little spring brackets on the leafs? The SOB dead hooks out of the hole doesnt it.
    You still have the 50's on the front? I was always planning on a smaller tire up front and maybe take the sway bar off. It already transfers great, but I was hoping it may make me a little quicker.
    oh ya it hooks. i got 295 50s on it now. it hooks so dang good. i have had the best luck with the truck to. i DROVE it to SAR and still ran my best pass ever.

  9. #29
    Join Date
    Jul 2008
    Location
    McAlester,OK
    Posts
    234
    Quote Originally Posted by badazzchevy327 View Post
    sweet vid in your sig trt, what did it have a ls1 back then and a 6.0 now?

    does that truck lift the wheel at all?
    had an ls1 with a 200 shot i think but now it has a 6.0 on a 150. ive made better times with the 6.0 what motor and setup u runnin?

  10. #30
    Join Date
    Jun 2007
    Location
    Ocala, Fl
    Posts
    257
    stock smallblock with some 30 over pistons, iron heads, 150 shot. whats your new best?

    96 c1500, stock suspension, stock bottom end, 93 octane, street radial- 1.60 11.5 at 115- on the small stage-sold
    05 SSS 2wd 228/230/80e/fti4k/5,5drop/215shot-sold
    90 350ss... beast build

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts