newbie to sit mod sugestions needed

[Sleaper]

ok so if im going to tow and use for daliy driver i should probley look for somthing thats good for idle to 5000 rpm and a tork convter thats in the 2000 rpm range

I think the stock stall is around 1800. I would contact Nelson Performance and tell them what you use your truck for and what your goals are. They can help you out with a cam and point you in the right direction for a stall.

[Show&Go]

I think the stock stall is around 1800. I would contact Nelson Performance and tell them what you use your truck for and what your goals are. They can help you out with a cam and point you in the right direction for a stall.

+1

[hillbilly6.0]

thanks for the help ill probley call sometime this week