Ran good for two weeks, now won't die

[oneBADDz]

Speartech. There is no relay on the harness side after where I disconnected power, just the single pink wire that you put ignition switched power to that power everything in the engine harness. When ignition switched power is removed, it doesn't die. My thoughts are that it must be getting feedback power in some way, but I really have no idea.

I finally hooked my brake switch stuff up, I'm thinking since that's "normally closed" maybe it's getting power through that?

The only relay on the harness side is the fuel pump, and I did change that relay to check, and it made no difference. My first thought was a relay somewhere, but I disconnected ignition switched power after all relays and it still ran, so it must be coming from somewhere engine side

Two weeks is slightly misleading, it ran great for months, but then two weeks of DD duty once the exhaust was on, everything was functional, etc. I also wired the harness up myself, then didnt like the look so I sent it off anyways to get cleaned up.