Need A Little Info On My Cam Swap...

[CHEVROLADE]

If its the older LS6 cam from a 02-04 vette then no you dont need a new spocket you already have the LS2 style one...i would go ahead and get pushrods and maybe do a better spring like a 918 or a PRC spring

GREAT!!yea is from a 04'zo6,yea thats what i was thinking on getting something better than stock z06 springs.ill do pushrods as well.

by any chance,would you happen to know what i can bump my shift points to??right now im shifting at 6000 rpm.ide really like to shift higher if it would help.
and have you read on any actual hp gains with this cam swap,mine being f/i ?

thanks again...

[mean05]

GREAT!!yea is from a 04'zo6,yea thats what i was thinking on getting something better than stock z06 springs.ill do pushrods as well.

by any chance,would you happen to know what i can bump my shift points to??right now im shifting at 6000 rpm.ide really like to shift higher if it would help.
and have you read on any actual hp gains with this cam swap,mine being f/i ?

thanks again...

people rave about this cam with FI which is why i went with this cam for my TT setup...right now i have mine set at 6200 1-2 6100 2-3 6100 3-4, i am going to bump it up later cause of the vic jr intake i am running....i would put it on the dyno and see where its making the power...that will tell you the best place to set the shifts at

[CHEVROLADE]

people rave about this cam with FI which is why i went with this cam for my TT setup...right now i have mine set at 6200 1-2 6100 2-3 6100 3-4, i am going to bump it up later cause of the vic jr intake i am running....i would put it on the dyno and see where its making the power...that will tell you the best place to set the shifts at

oh man i didnt kno you were running this cam,good to know,please keep me up dated.

one more thing these are the 7.425 pushrods that i need right?

thanx for your info,appreciate it