My Radix Pulleys are done!

[moregrip]

Originally posted by vicred4.8@Nov 30 2004, 11:59 AM
I get what youre talking about moregrip. How can you have a 3.25" if you go in .10" increments starting at 2.7"? I thought you were refering to what size the pulley in the pic was

that's affirmative

[farmtruc]

Sorry for the confusion,

The sizes are available in:

2.7
2.8
2.9
3.0
3.1
3.25

The SS Silverado tunes that come with the Radix are fairly conservative, so a 3.25 and a 3.1" are usually ok to install without a tune. However, a tune will compliment it. I've installed a few 3.0" pulleys with no tuning and the truck produced ZERO KR, but I think it's pushing it with no tuning. That was on good 93oct here in San Antonio.

The pulleys are $99 and they are in stock and ready to ship. A tenth lower from your current size is going to give you about 10hp. .40 tenths may not give you 40hp though .

thanks,

allen

[RedHeartbeat]

Is it an illusion or is the slot broached out of square from the centerline?

[farmtruc]

Originally posted by GREG_92_C1500_2001_LS1_A4@Nov 30 2004, 07:53 PM
Is it an illusion or is the slot broached out of square from the centerline?

must be the shadows and flash causing an illusion, they fit perfectly.

allen

[RedHeartbeat]

That's pretty cool that they milled your company name on the pulley. Shweet.

[moregrip]

Originally posted by farmtruc@Nov 30 2004, 06:51 PM
Sorry for the confusion,

The sizes are available in:

2.7
2.8
2.9
3.0
3.1
3.25

The SS Silverado tunes that come with the Radix are fairly conservative, so a 3.25 and a 3.1" are usually ok to install without a tune. However, a tune will compliment it. I've installed a few 3.0" pulleys with no tuning and the truck produced ZERO KR, but I think it's pushing it with no tuning. That was on good 93oct here in San Antonio.

The pulleys are $99 and they are in stock and ready to ship. A tenth lower from your current size is going to give you about 10hp. .40 tenths may not give you 40hp though .

thanks,

allen

what have you seen with an LQ4 that runs a stock 3.1" pulley?

[Defunct SO]

Those look great Allen. I need to get hooked up with a pulley for the wifes GTP.

[farmtruc]

Originally posted by trtturbo@Dec 2 2004, 05:29 PM
Those look great Allen. I need to get hooked up with a pulley for the wifes GTP.

what size is on there now? I have a few I can make you a deal on, I think I have some 3.25's available.

allen