For you guys with returnless fuel rails &corvette filters

[scarbrow]

I am having some trouble finding a fuel fitting that I need for my swap, I am going with the corvette fuel filter and need to find the fitting that goes into the front side of it. I used my awesome MS paint skills to draw a picture of what I am needing (the red part). Thanks in advance

[URL=http://imageshack.us][/

[pcmcobra]

just cut off the end piece from a factory fuel line, that's what I did. Or you can get a 12" or 16" piece that has 2 ends quick connect from the auto parts store, look in the help section. I have seen the dorman parts at every local auto parts place.
The quick connect end goes into regulator, the other end is cut off with tube cutter and I used a 3/8 compression to AN fitting.

[scarbrow]

I tried to find it at o'reilly's and the guy there said that they couldn't even get it. And I have been to a couple salvage yards and haven't had any luck
I already have my 3/8 to AN compression fitting to use once I find this part.

[low91]

I found mine at O'reillys so I don't know why they couldn't order one for you.

What I did was cut the fitting in two to use a rubber hose, If you just need half the fitting I could send you the end I didn't use if you can't find one close.

[scarbrow]

I found mine at O'reillys so I don't know why they couldn't order one for you.

What I did was cut the fitting in two to use a rubber hose, If you just need half the fitting I could send you the end I didn't use if you can't find one close.

If it comes down to it I might have to do that, and do you know what the part number was for it?

go to the dealership and ask a tech to do a factory flare on your line for you

I am running braided line or I would do that.

[low91]

The part number is 800-155, If you can't find one just let me know.

[lilfreddie]

I am having some trouble finding a fuel fitting that I need for my swap, I am going with the corvette fuel filter and need to find the fitting that goes into the front side of it. I used my awesome MS paint skills to draw a picture of what I am needing (the red part). Thanks in advance

[url=http://imageshack.us]cd[/

Street and performance has a corvette to -6 adapter that i used

[scarbrow]

Street and performance has a corvette to -6 adapter that i used

I don't know how you ever found it on the site, I couldn't

One of the worst web pages I have ever been on.

[NITROUS]

Call them, Mark will know what your looking for.