my x over to manifold is leaking at the flange with that silicon gasket stuff also...soon as i get a gasket for it i will see if thats my problem with that side 02 sensor...
my x over to manifold is leaking at the flange with that silicon gasket stuff also...soon as i get a gasket for it i will see if thats my problem with that side 02 sensor...
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
Does it go away when you lift your foot off the gas...?Originally Posted by RedHeartbeat
07 Z71 4x4, 6.0L, 3.73s, Turbonetics T76 @ 10 psi, 75 shot, Snow meth kit, PLX DM-100 wideband gauge, Nelson tune, Comp 212/216 .557/.561 114 lsa, 60# injectors, Yank 3000, 4L80E , Magnaflow - dumped, e-cutout
Line-X, Pace Edwards Full Metal Jackrabbit bedcover
Try a T4 gasket? That's what I used...no issues.
what is the one for the crossover to manifold
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
on this log it is a factory o-ring gasket that goes on the driver side that is used to seal the crossover to the log.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Looks like it's coming along nicely Greg.
30' Ford Model A Tudor Sedan - Custom chassis - Big bore LS2 - twin B76's - Glide - 9" w/ 3.07 gears - 30" DR tire - 2k lbs cruiser
Truck is done on my end and is going home to its owner after almost 3 years. Hopefully we get to see it again at the meet in February. A new driveshaft and posi are next in line for installation, along with new tires and wheels to help in the appearance department. I left a couple little things to be finished up, a small drip in the Moroso coolant expansion tank and a leak between the custom exhuast manifold log and the turbo since the copper silicone stuff didn't work. I sure hope they keep us updated on new items installed as the truck progresses.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Something tells me the new owner will keep us posted.
yes he will ...i'll make shure of that....thanks again greg for a fantastic fine job you did on the truck...i hav'nt seen it yet but i can see a smile thru the phone on my sons face when i was talking to him awhile ago.....lol
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
So............ Tell us about the Test drive when u were done?????Truck is done on my end and is going home to its owner after almost 3 years. Hopefully we get to see it again at the meet in February. A new driveshaft and posi are next in line for installation, along with new tires and wheels to help in the appearance department. I left a couple little things to be finished up, a small drip in the Moroso coolant expansion tank and a leak between the custom exhuast manifold log and the turbo since the copper silicone stuff didn't work. I sure hope they keep us updated on new items installed as the truck progresses.
Posting Permissions
Reply With Quote
