Vic Jr. intake ?

[skeet]

so you are talking about at the base where the elbow bolts to the intake....on one side it is already tapped on the intake itself for a vacuum line which i will use for the FPR till i get the new rails on there...so you are saying tap the base at the same place on the other side?

no, the port on the intake itself is for the brake vacuum line

this is at the bottom of the elbow maybe an inch from very bottom, there should be arectangular plate, this is where you drill and tap your elbow for necassary sensors and vacuum lines

[skeet]

damn looked through my photobucket but dont have pics of the back of the elbow, i can try and get one if you need it to show you want i am talking about for vacuum lines if needed

[mean05]

i would appreciate it if you wouldnt mind

[skeet]

i would appreciate it if you wouldnt mind

i'll see if flaco can take a snap shot, anyway do you have a rectangular plate welded about 1/2 to 1" from bottom of elbow.. pm me if your number if you wanna discuss it on the phone

[mean05]

972-762-8374

[RedHeartbeat]

Here's you food for thought...

[mean05]

yeah the Edelbrock doesnt have that plate but i now see where you are talking about...damn i was trying to keep the sensor hidden

[skeet]

yeah the Edelbrock doesnt have that plate but i now see where you are talking about...damn i was trying to keep the sensor hidden

mean , youre running a vic jr with a elbow? if so who made your elbow? elbows.com

[skeet]

nevermind lol i looking at it now

[SCIV]

Yeah, yours looks like the ultra low profile elbow. Mine is the middle one, and I have more room on it.