Anyone wo tuned a Lockup converter please help

[Abood]

its new less than 300 kms on it

[-HIC-]

its new less than 300 kms on it

Make sure shift lock is disabled in the tune.

Make sure it will not apply in 2nd - you could do this for 3rd also

Then set it to apply at whatever speed you like in 4th all the way until about 60% tp then set it to not apply past that tp%

The third release should scale up from say 25 ish all the way to 60 ish at 100% tp The fourth Release start at 30 ish and scale to 60 ish at 100% tp

If it still grinds after this I would say something is wrong with the converter, boost valve, etc..

[-HIC-]

Make sure shift lock is disabled in the tune.

Make sure it will not apply in 2nd - you could do this for 3rd also

Then set it to apply at whatever speed you like in 4th all the way until about 60% tp then set it to not apply past that tp%

The third release should scale up from say 25 ish all the way to 60 ish at 100% tp The fourth Release start at 30 ish and scale to 60 ish at 100% tp

If it still grinds after this I would say something is wrong with the converter, boost valve, etc..

Send me the file bbowles1@gmail.com I am not an expert, but I did manage to get mine to lock when I wanted it to this afternoon and I have a 3600 stall as well.

[ff_jeff]

Send me the file bbowles1@gmail.com I am not an expert, but I did manage to get mine to lock when I wanted it to this afternoon and I have a 3600 stall as well.

Bowles...

[Abood]

email sent and thank you guys for your help I will try Doing that today

[-HIC-]

Replied, it also looks like you are running hella rich over 4k unless you are FI, or Dry NOS.