got started on it last night, heres the pics, he will post below for all the specs.
got started on it last night, heres the pics, he will post below for all the specs.
badass! keep the updates comin
1951 3100
1984 C10
Yeah were swapping my tired old 5.3 for a lq9
Its a fully built motor it has probe forged dished pistons and probe h beam rods.
The cam is a custom ground bullet cam the specs are 226/224 .582/.576 on a 115 lsa
The head are 317's that our local race shop has ported and polished with 2.05 intake and 1.8 exhaust valves and comp magnum 1.75 roller rockers.
The turbo setup is a trick performance piece with a turbonetics 76 mm turbo and a 4 inch intercooler and a 3.5 ivch down pipe. It also has a turbo smart 52 mm bov and a turbo consepts 44mm wastegate vented into the atomosphere.
Its also getting e fans with a aluminum shroud built by rick from trick performance.
And yes its also getting a 100 shot you know for intake tempsalong with a lot of meth
Were going to try for 20 psi and about 750 to the wheels
If yall guys have any helpful hints please feel free to chime in
wish us luck
Trey
Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
EPS cam 23x/23x 600/603 112lsa
KP 6 link bagged with Accuair E-Level
http://www.nitrousexpress.com/
haha what about the trans..?
you really went all out lol
1951 3100
1984 C10
Nice!You're going to need a transmission shortly. I sure hope you have billet servos in the transmission so it doesn't fry the band first time out.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
+1 on the trans...I'm only runnin' 10psi with the stock 60E and I'm afraid to pull any fully stalled launches. Those will wait 'til the Lvl 5 is in!!! I've got the same turbo, looks like...I love mine! Keep us updated on the progress!
07 Z71 4x4, 6.0L, 3.73s, Turbonetics T76 @ 10 psi, 75 shot, Snow meth kit, PLX DM-100 wideband gauge, Nelson tune, Comp 212/216 .557/.561 114 lsa, 60# injectors, Yank 3000, 4L80E , Magnaflow - dumped, e-cutout
Line-X, Pace Edwards Full Metal Jackrabbit bedcover
Oh yeah the trans is getting rebuilt to esencially a ftl level 5 with a 2800 yank stall and a zippy performance shift kit and billet servos
Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
EPS cam 23x/23x 600/603 112lsa
KP 6 link bagged with Accuair E-Level
http://www.nitrousexpress.com/
got any more pics?
1951 3100
1984 C10
no we only worked on it today for about 45 min, we got the intake pulled and the harness loose, the 5.3 should be out of the truck tomorow and then parts swapping will begin!
intake, sensors, front drive accessories...etc
yeah I'll post some tomorrow
Junkyard 5.3 milled heads 200 shot, built 4l80e with circle D 4000 multi disc converter
EPS cam 23x/23x 600/603 112lsa
KP 6 link bagged with Accuair E-Level
http://www.nitrousexpress.com/
Posting Permissions
Reply With Quote
