+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: 90mm TB & intake with wiring harness adapter

  1. #1
    Join Date
    Apr 2005
    Posts
    4,229

    90mm TB & intake with wiring harness adapter

    UPDATE: Used 90mm intake from a GTO. All rails, injectors, sensors, gaskets, etc. included. Also included are brand new intake bolts and a new TB gasket. I also have a wiring extension for something I bought from Katech, but I can't remember what sensor it went to. $150 OBO

    90mm TB & harness are sold.

    Last edited by SCIV; 09-30-2008 at 09:40 AM. Reason: update listing
    Gone, but not forgotten!

  2. #2
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    tell me your upgrading
    1951 3100
    1984 C10

  3. #3
    Join Date
    Apr 2005
    Posts
    4,229
    Quote Originally Posted by duckysbht View Post
    tell me your upgrading
    Gone, but not forgotten!

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    The extension wire should be for the MAP sensor since its now at the front of the intake behind the throttle body on LS2 intakes.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Apr 2005
    Posts
    4,229
    Quote Originally Posted by RedHeartbeat View Post
    The extension wire should be for the MAP sensor since its now at the front of the intake behind the throttle body on LS2 intakes.
    Thank you sir!
    Gone, but not forgotten!

  6. #6
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    I'll give you free retunes!

  7. #7
    Join Date
    Apr 2005
    Posts
    4,229
    Quote Originally Posted by farmtruc View Post
    I'll give you free retunes!
    I thought I had those already?????
    Gone, but not forgotten!

  8. #8
    Join Date
    Feb 2007
    Location
    Spring, Texas
    Posts
    1,739
    Anyone know if this will be a direct swap with my stock set up and 42 lb injectors?? If not, what else would be needed??

    2004 Silverado Crew Cab, forged iron 5.7, STS w/MP turbo, 10+ psi, FMIC, Tial 50mm BOV, Vic Jr, Snow performance meth, MTI Stealth cam .220/.220 .581/.581 115lsa, Comp chromoly pushrods, Yank TT3000 stall, LS1 Efans, 160 tstat, Trucool 40k trans cooler, 60# injectors, Walbro fuel pump, Patriot springs, Built 4l65E w/billet input & output shafts, Eaton posi, SD tuned...all installed by Klein North Automotive

  9. #9
    Join Date
    Nov 2006
    Location
    Mesquite, TX
    Posts
    4,321
    Quote Originally Posted by RedHeartbeat View Post
    The extension wire should be for the MAP sensor since its now at the front of the intake behind the throttle body on LS2 intakes.

    you dont have to have the extension...there is enough wire in the stock harness to easily make it work...

    man if you want to sell the 90 and harness i would be very interested FYI
    2006 silverado SS....Clifford Jr...turbo coming soon
    1970 Chevelle ly6 swap....d1 coming soon

  10. #10
    Join Date
    Apr 2005
    Posts
    4,229
    Quote Originally Posted by mean05 View Post
    you dont have to have the extension...there is enough wire in the stock harness to easily make it work...

    man if you want to sell the 90 and harness i would be very interested FYI
    Oh well, I already have it.

    I would like to try and sell together first. Send me a PM on what you were thinking though...
    Gone, but not forgotten!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts