i just had fort worth gear and axle install mine they charged 225 i have 875 total in my rebuilt tru trac gears and install kit
i just had fort worth gear and axle install mine they charged 225 i have 875 total in my rebuilt tru trac gears and install kit
[SIGPIC]5.3 k&n cai ,asm lt, hf cats, aero turbine muffler, vhp 216/224-551/551-115lsa, tbss intake, ls2 90mm tb,tb bypass, comp double roller tc, hv oil pump, ls2 injectors,nelson tune, b&m super cooler, taylor 10.4mm wires, ngk tr55ix, 373 Detroit tru trac,
lol u have no friends?
well im going with an Eaton POSI LSD 3:73 and they got me down to an even lower price so im looking at paying about a grand for everything
2002 Chevy Silverado LT 5.3L z71 ECSB, Fully Built DMC 4L65e, Transgo 4L65E .500 Boost Valve, Transgo Shift Kit, Billet 1st Gear Servo, 2nd Gear Sonax Super Hold Servo, 4th Gear Billet Servo, Rebuilt 10 Bolt w/ OEM G80 and 3:73's, Dumped Single 3" Spintech Muffler, 3" E-Cut Out
Even better price.
i just put 3.90 and a true trac in mine....it wasnt too bad...just time consuming....dont be scared to do it yourself, just take your time and do it right.
ive never touched my diff only to put fluid in it or change the gasket soo i dont think it would be that easy to do my self plus its 8 hours of labor and they are only charging me 200$$
2002 Chevy Silverado LT 5.3L z71 ECSB, Fully Built DMC 4L65e, Transgo 4L65E .500 Boost Valve, Transgo Shift Kit, Billet 1st Gear Servo, 2nd Gear Sonax Super Hold Servo, 4th Gear Billet Servo, Rebuilt 10 Bolt w/ OEM G80 and 3:73's, Dumped Single 3" Spintech Muffler, 3" E-Cut Out
That's flat rate pay system for you. 8 sounds a little high....even for a complete overhaul.
i thought it was a pretty damn good deal
2002 Chevy Silverado LT 5.3L z71 ECSB, Fully Built DMC 4L65e, Transgo 4L65E .500 Boost Valve, Transgo Shift Kit, Billet 1st Gear Servo, 2nd Gear Sonax Super Hold Servo, 4th Gear Billet Servo, Rebuilt 10 Bolt w/ OEM G80 and 3:73's, Dumped Single 3" Spintech Muffler, 3" E-Cut Out
its not a bad deal...8 hrs is a long time for rearend work though
It's book time (flat rate) not actual time. My customer pay labor time guide shows 7.7 hours for a complete overhaul so 8 is not that far off.