Keep practicing you'll get it. You have a manuel trans also right? and 20's...your doing just fine but, Hopping? Check your pinion angle.
Keep practicing you'll get it. You have a manuel trans also right? and 20's...your doing just fine but, Hopping? Check your pinion angle.
30' Ford Model A Tudor Sedan - Custom chassis - Big bore LS2 - twin B76's - Glide - 9" w/ 3.07 gears - 30" DR tire - 2k lbs cruiser
yeah its a t-56 and 20's next season im going to run some slicks... im not sure what my pinion is supposed to be set at and if there is any other way to adjust it without using shims i already have 4 degree shim in there. because it was WAY off. i still believe its a bit off though.
09 CREWCAB LTZ SILVERADO, 6.2, SIX SPEED, CAI,
Shims??? Check that thing again.. You should not have to shim it with the right lowering kit.. Your truck has 8's in it easy! just make sure it is setup right! I spun my slicks through first gear tonight and still ran low 8's you know we have basically the same setup!
well i have a bell tech 4/6 flit kit and as far as i knew your not supposed to have to shim flit kits... so im kind of confused as well. and i know we have almost the same setup and it makes me mad haha. but arent you running nitrous? i still spun and the rear tires hopped a bit so i know theres more left in it.
09 CREWCAB LTZ SILVERADO, 6.2, SIX SPEED, CAI,
Nice times. Don't worry you will hit 8's. My first runs I was hitting 10s and now I run 9.4 at 79 all day long lol.
yeah i mean i dont really care i just really like cruising and nowing it does have some nuts.. ii really dont care if i ever make it to 12s or 11s or any of that. its just fun for me. there arent enough people up here who are that interested in it for me to go over board by myself lol.
09 CREWCAB LTZ SILVERADO, 6.2, SIX SPEED, CAI,
You need Caltrac bars on there.That will stop your wheel hop and spring wrap-up.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote