You can usually pick up a good used G80 for about $100 and then just pay to have it installed with a new set of bearings and races.
You can usually pick up a good used G80 for about $100 and then just pay to have it installed with a new set of bearings and races.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
4wd, gotta do the front and the rear at the same time if you have electronic push button. With the electronic, the front drive shaft spins all the time. Not sure if you would get bound up or not, but i wouldn't want to find out the hard way. If you don't use the 4wd that much, i would go with a Yukon or Standard Gear up in the front because the front set only runs around $120.
2013 CC 5.3
81 C10 LS1 project
Posting Permissions
Reply With Quote