Ok, from a dead stop, when I push the pedal to the floor, there is like a .5-1 second delay before anything happens. This makes for some real bad reaction times. Is this common on the DBW trucks and is there anything I can do to fix it?
Ok, from a dead stop, when I push the pedal to the floor, there is like a .5-1 second delay before anything happens. This makes for some real bad reaction times. Is this common on the DBW trucks and is there anything I can do to fix it?
<><
2004 ECSB Silverado LQ9 6.0L Superchips;14.0 @ 96: 4900lbs of Fun
69 Chevelle Coupe LS1/A4 swap
My tune cured mine.
So I guess that is just the amount of time it takes the signal to travel from the pedal to the TB? I guess a tune can reduce that time is what your saying?
<><
2004 ECSB Silverado LQ9 6.0L Superchips;14.0 @ 96: 4900lbs of Fun
69 Chevelle Coupe LS1/A4 swap
there is a built in delay time. Electical impulses travel at the speed of light.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
And a full fledge tune is the only way to get rid of it? I like my superchips, because I can put the 87 max tune on it for everyday driving and tune it to 91 octane when playing around on the weekends.Originally Posted by RedHeartbeat
<><
2004 ECSB Silverado LQ9 6.0L Superchips;14.0 @ 96: 4900lbs of Fun
69 Chevelle Coupe LS1/A4 swap
I have a DBW truck and I cut .034 light last friday. I dont have any noticable delay when nail it.
just hit when the 3rd light comes on...you'll be fine
I do that at my local track, but at Memphis in October it will be a pro tree. Guess I'll try deep staging and see if I can cut some lights.
<><
2004 ECSB Silverado LQ9 6.0L Superchips;14.0 @ 96: 4900lbs of Fun
69 Chevelle Coupe LS1/A4 swap
So you are saying you run your tank dry on 87 octane gas M-F, then fill up with 91 octane for the weekend...run it dry, and then fill it again with 87 for the work week? Sounds like a PITA to me. Seriously, it costs like $6 more to put 93 in your tank. Plus your truck will run better, get better gas mileage, motor will run smoother, etc. Switching back and forth is too much trouble. Get a 93 octane custom tune and be done with it!
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Amen brother! +1So you are saying you run your tank dry on 87 octane gas M-F, then fill up with 91 octane for the weekend...run it dry, and then fill it again with 87 for the work week? Sounds like a PITA to me. Seriously, it costs like $6 more to put 93 in your tank. Plus your truck will run better, get better gas mileage, motor will run smoother, etc. Switching back and forth is too much trouble. Get a 93 octane custom tune and be done with it!
Vortec Performance Tuned
LQ9 built 4L60 LTs and a billion miles on the speedo!
Posting Permissions
Reply With Quote
