i dont know, the tank never moved so who knows.
Now my only problem is i am still burning oil, i was idling for a little bit like 15 min, and i noticed that there was a bluish smoke behind the truck for a bit, but nothing noticable while driving.
Bad PCV valve? Or a Bad seal or something? Gonna throw some high milage 5w-30 in there and see if it helps.
EDIT: Also when i used to start the truck before the cam, i would have oil pressure all the time, 60 on startup and then eventually go down to 40 and move in pressure with RPM.
Now i start the truck, it sits at 40, or what it reads at 40, then wont move with RPM till its warmed up for about 20 min, then for a couple minutes or so, 10 maybe at the most, one day it was constant, the oil pressure was moving 5 or so PSI, running crusie control, flat road it jumps around. So that cant be good, it did it today for 10 min, and then just stayed at 50 for the entire 80 mile road trip, but i also noticed i was burnin a little oil while idling after 15 min.
Last edited by 99sierra4x4; 08-12-2008 at 10:32 PM.
1999 GMC Sierra SLE ECSB .... 5.3L w/ Slight Performance Tune / True Duals with Flo Pro Glass Packs.
Project ''Bad Company'' Future = 6.0L (Forged Internals) / Boost (TVS) / 4L65E LvL 5 / AWD Conversion / Full LT's with Cats / Methanol Injection / Lowered 2" / SS Rims / Frame Up resto
Officially Employed!!!
Reply With Quote