+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: What would this truck be worth.

  1. #1
    Join Date
    Feb 2008
    Location
    edmond, ok
    Posts
    299

    What would this truck be worth.

    I am looking at a 1990 chevy silverado rcsb 4x4 with 190,000 miles on it. It has a rebuilt tranny last year and the motor has had new gaskets and does not leak any where it has new exhaust and some front end work done. It is white and the paint looks like most white trucks from that time. And the front windshield needs replaced. So my question is what do you guys think is a good price for it? Thanks
    07 GMC ccsb 1500 4x4, front replacment bumper, 285 70 r17 on 17" black helo max 6, Dual flowmasters dumped.

  2. #2
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    $2500
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  3. #3
    Join Date
    Feb 2008
    Location
    edmond, ok
    Posts
    299
    $2500 even needing a new paint job and new windshield? Thanks for the reply.
    07 GMC ccsb 1500 4x4, front replacment bumper, 285 70 r17 on 17" black helo max 6, Dual flowmasters dumped.

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Only if its in good driveable condition.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Feb 2008
    Location
    edmond, ok
    Posts
    299
    Yep drives great and like i said no leaks and a mechanic friend owns it that is selling it.
    07 GMC ccsb 1500 4x4, front replacment bumper, 285 70 r17 on 17" black helo max 6, Dual flowmasters dumped.

  6. #6
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Ok, so its a 90 with white paint? I know that some of the later 90 models and almost all of the 91 models had a white paint defect... Has it started to peel off?

    When you say it has had some front end work done, does that mean stuff like new ball joints, new bushings, and alignment, etc?

    If so, I would say somewhere around $3000. I think $2500 is not enough, considering the only things needed are cosmetic...

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  7. #7
    Join Date
    Feb 2008
    Location
    edmond, ok
    Posts
    299
    Yes the paint is peeling off and on the front end work not sure what all yet i think he did the front drive shaft mainly.
    07 GMC ccsb 1500 4x4, front replacment bumper, 285 70 r17 on 17" black helo max 6, Dual flowmasters dumped.

  8. #8
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Have you priced a quality paint job lately?
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  9. #9
    Join Date
    Apr 2005
    Posts
    4,229
    All the early years had paint problems. But the primer was the fault, not the paint. There was a factory repaint going on at the time, mine (1988) was repainted.
    Gone, but not forgotten!

  10. #10
    $1000.00 over here in Jawja
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts