Will The Fly Wheel And Spacer Fit The 96 4l60e?
What About The Bell Housing Can I Swap It To So It Bolts To The Oil Pan. What About The Converter?
If All This Fits The 96 4l60e Would I Even Need The Flywheel?
Will The Fly Wheel And Spacer Fit The 96 4l60e?
What About The Bell Housing Can I Swap It To So It Bolts To The Oil Pan. What About The Converter?
If All This Fits The 96 4l60e Would I Even Need The Flywheel?
The flywheel may not be necessary but the adapter and bolts will be because the LS type crankshaft is shorter. You need the extension to make it longer to marry up to the old style flywheel and converter. The old style 60e doesn't have a bolt on bell housing so you cannot change that. I ran an old style 80e and it was only held to the engine with 5 bolts and that wasn't an issue.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
thanks
i appreciate all the info.
Posting Permissions
Reply With Quote