Okay, Folks, help me out here if you can. I need a throttle cable to go with my LS1 in my 92 C1500. I had the one for a Impala SS and it's too short for the LS1. Anyone know of a GM cable that will work with a F-body LS1 throttle body? GM part numbers appreciated.
Thanks
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Not sure if a F-body cable will work or not. I wound up doing a corvette electric throttle.
1993 C1500, Indy 500 Edition - 6.0/4L80, complete Hotchkis suspension upgrade, '98 GMC front end swap, 17" AR Torq Thrust II's.
I used a f-body cable but it is way too long. I think the truck cable would work better, that is what Farmtruc used. I don't know the part number but I bet the dealer does.
2006 Superior Blue Trailblazer SS AWD, Stock as a rock
Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).
Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning
93ND500, how hard was it to install the electronic controlled throttle body, I now you need the pedals and the throttle body, but what about the wiring. Does it run through the ECU?
I run a Lokar TC-1000LS1
36" ON MY 91
werd. same one im running. $40 jegs/summit carry em.Originally posted by 91ls1@Jun 29 2004, 11:06 AM
I run a Lokar TC-1000LS1
36" ON MY 91
Hugger Orange 99 SS Hardtop #756
485rwhp/440rwtq SAE
For my swap the stock F-body cable worked fine, my engine came with the cable still on it. It slips into the firewall the same way that the original one did.
1 ton, 4600 pounds, 14.3@94mph any questions?
Okay, thanks. I got the f-body cable. I like the extra length, gives me a chance to route it where I want it.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote
