You could wire the fans on a relay instead of direct through a switch. You'll need to wire them up with a relay to control them through the PCM also. The PCM sends a ground signal to the relay to turn the fans on.
You could wire the fans on a relay instead of direct through a switch. You'll need to wire them up with a relay to control them through the PCM also. The PCM sends a ground signal to the relay to turn the fans on.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
X2, you need to use relays.
2001 ECSB 4x4, 5.3, Radix, 3.0 pulley, VHP Trucker cam, 216/224 .551/.551 115 lsa, 1.8 Crane roller rockers, 4L65E, Yank SC3000, 3.73, Cal-Tracs, HPTuners.
thanx guys working beautifully next is to fix the fuel gauge fuel pump is out of the silverado the motor came out of any guess's
Posting Permissions
Reply With Quote