Silverado 100 Horsepower Performance gain on a budget

[-HIC-]

here is my run it sounds good all the way to 6400 but the graph just drops around 5800.. You probably know me better By Bryan since you have done so many retunes for me (Thanks)

MVI_2053.flv - Video - Photobucket - Video and Image Hosting

[farmtruc]

here is my run it sounds good all the way to 6400 but the graph just drops around 5800.. You probably know me better By Bryan since you have done so many retunes for me (Thanks)

MVI_2053.flv - Video - Photobucket - Video and Image Hosting

I know I have to setup my rev/? on my dyno to record the correct RPM, maybe the dyno ignition or sensor isn't calibrated. If I don't set mine up, actual rpm and dyno recorded rpm are about 600rpms off.

[-HIC-]

I know I have to setup my rev/? on my dyno to record the correct RPM, maybe the dyno ignition or sensor isn't calibrated. If I don't set mine up, actual rpm and dyno recorded rpm are about 600rpms off.

This would make perfect sense b/c the if the truck feel off like the dyno showed It would feel like I lost 3 cylinders.. I need to make it up to SA to have you fine tune mine on the Dyno.
B

[yudlose]

Cheap HP