+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: Track Yesterday

  1. #1
    Join Date
    Nov 2006
    Location
    Mesquite, TX
    Posts
    4,321

    Track Yesterday

    i went to Redline yesterday and was very impressed with the new times on this cam....runs were only made on the 1st stage 125 shot....first run went 7.95@85.4mph with a 1.71 60' but the A/F was round 10.1-10.3 o i came back and jetted down the fuel side and pulled a 7.89@86.3mph with a 1.71 60' spinning bad...but they are not my best times but i am ecstatic because my old time were 7.75@86.5 with a 250 shot....next weekend if i can make it to the track i am hitting both stages on it....7.4's here i come
    2006 silverado SS....Clifford Jr...turbo coming soon
    1970 Chevelle ly6 swap....d1 coming soon

  2. #2
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113
    Nice times virgil! Have you ran without spraying yet? Just kind of trying to compare our 2 trucks on motor.
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


  3. #3
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    ...need a push or something?









    j/k good time bud...don't know enough about 1/8 mile to know how that would convert to 1/4 mile but

  4. #4
    Join Date
    Nov 2006
    Location
    Mesquite, TX
    Posts
    4,321
    Quote Originally Posted by Red03SilSS View Post
    Nice times virgil! Have you ran without spraying yet? Just kind of trying to compare our 2 trucks on motor.
    yeah it went 8.92@77mph on motor...motor to motor you will walk me...the cam i got was designed to work good on the nitrous...which it did better then i thought it would.....have you made it out to the track yet?

    1/4 mile would be round a 12.4-12.6
    2006 silverado SS....Clifford Jr...turbo coming soon
    1970 Chevelle ly6 swap....d1 coming soon

  5. #5
    Join Date
    Nov 2007
    Location
    THE MEAN STREETS OF OKLAHOMA
    Posts
    11,120
    cant wait to see it on the 100 extra awesome man 11 second truck club is in the near future.
    THEY CALL ME G.

    AZRAEL

    2017 RZR 1000 2 SEATER
    2023 RZR 1000 XP 4
    2008 LTZ DURAMAX 3500
    2023 300S 5.7
    2023 BUICK ENCORE[/B]

    The difference between winning and losing, is having a 2nd stage.

  6. #6
    Join Date
    May 2006
    Location
    Waco TX
    Posts
    3,113
    Quote Originally Posted by mean05 View Post
    yeah it went 8.92@77mph on motor...motor to motor you will walk me...the cam i got was designed to work good on the nitrous...which it did better then i thought it would.....have you made it out to the track yet?

    1/4 mile would be round a 12.4-12.6

    Heading out the saturday. Hopefully its nice cool and sry. Ill im taking some stockers so maybeill see low 13s 1/4s and high 7 1/8ths. It would be nice.
    DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31

    2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts


  7. #7
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Good times Virgil! It must be nice to be able to fine tune your truck at the track to make better times... I need to get my hands on some of that software so I can learn too...

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  8. #8
    Join Date
    Nov 2006
    Location
    Mesquite, TX
    Posts
    4,321
    Quote Originally Posted by Red03SilSS View Post
    Heading out the saturday. Hopefully its nice cool and sry. Ill im taking some stockers so maybeill see low 13s 1/4s and high 7 1/8ths. It would be nice.
    to make a 7 1/8th you will run a high 12...that would be badass...you heading to Ennis?

    Thanks Tyler....let's get out to Ennis and get the software it's really nice to see what everything is doing
    2006 silverado SS....Clifford Jr...turbo coming soon
    1970 Chevelle ly6 swap....d1 coming soon

  9. #9
    Join Date
    Apr 2007
    Location
    The land of wings and snow
    Posts
    160
    x2... 7 in the eigth would be mid 12s easily, maybe tap under 12.50...
    -Matt

    He who dies with the most toys wins.

    (Still On)Summer-00 4.8 Silvy (Slow...Needs Bottle)
    (Still Off)Winter-94 FS Blazer (Almost ready)
    Pulls out friends- 93 1500 4.3 W/T Special

  10. #10
    Join Date
    Sep 2004
    Location
    Breaux Bridge, LA
    Posts
    667
    nice times bro!
    looking forward to them improving.

    11' Sierra 6.2 NHT
    14.46@91 Stock
    89' Mustang LSX
    10.35@130 pump gas LQ4

    Knothead Racing

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts