+ Reply to Thread
Results 1 to 10 of 29

Thread: New Trans Cooler

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Location
    Eastern Idaho
    Posts
    181
    So I'm looking at the front end of my 2K Tahoe and it looks like I'm gonna need to take a lot of things off including the grill to have the space to work to install a tranny cooler. I'm assuming it's not majorly difficult just time consuming to take apart the nose on one of these?

  2. #2
    Join Date
    Jun 2007
    Location
    saratoga springs ,new york {upstate ,adirondacks }
    Posts
    1,878
    na ,its a piece of cake ,mostly pullout tabs and some screws.i can pull my grille out in 5 -10 mins.
    mods:2004 sierra ext sb,20s ,big brake kit w,hawk pads,air bagged,2006 6.0 lq4 swap,vortec supercharged10psi, air to water intercooled w/ dual electric fans on it ,snow meth injection kit,60lbers, e-fans ,big radiator swap ,cam 218 /222 548/550 comp .hardened prs .1.85 comp roller rockers ,guideplates ,crane double springs,trans 4l65e built .pacesetter l/ts true duals w/x pipe and magnaflows,14 bolt rearend swap ,3.73s,aroemotive fuel pump system w/elec.fuel controller and bypass regulator a/n fittings, taylor 10.5s interceptor gauge,aem w/b a/f ,autometer boost/vac NELSON 93 OCTANE TUNED .

  3. #3
    Join Date
    Jan 2008
    Location
    Eastern Idaho
    Posts
    181
    Quote Originally Posted by ramsey rider View Post
    na ,its a piece of cake ,mostly pullout tabs and some screws.i can pull my grille out in 5 -10 mins.

    Do you need a special tool for the pull out tabs so you don't ruin them or do you just plan on it and buy a pack of new ones? Is there anything else to come off or is the grill all you really need to yank to do a tranny cooler?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts