Originally Posted by
RedHeartbeat
They are usually off by about 1/4". What I do is get one bolt in on the driver side and then put my hoist chain to a bolt hole on the driver side and lift just a bit to put a load on the rubber mount. That will give you the alignment for the passenger side hole. Just play around with it for a little bit and all will line up fine.
That needs to be HIGHLIGHTED in your write up, unless I just missed that part. IT IS IN!!!
Thanks for confirming what my father-in-law was saying we needed to do in the first place.
Thanks for the quick and helpful response.
Last edited by SWBLS12B; 11-21-2007 at 10:10 PM.
1990 SWB 2000 5.3l 4l60e
It's in just tieing up the loose ends.
Posting Permissions
Reply With Quote