what year are the 15719194 off of?
I am trying to stab my motor and can't get the mounts to line up.
what year are the 15719194 off of?
I am trying to stab my motor and can't get the mounts to line up.
1990 SWB 2000 5.3l 4l60e
It's in just tieing up the loose ends.
They are usually off by about 1/4". What I do is get one bolt in on the driver side and then put my hoist chain to a bolt hole on the driver side and lift just a bit to put a load on the rubber mount. That will give you the alignment for the passenger side hole. Just play around with it for a little bit and all will line up fine.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
That needs to be HIGHLIGHTED in your write up, unless I just missed that part. IT IS IN!!!Originally Posted by RedHeartbeat
Thanks for confirming what my father-in-law was saying we needed to do in the first place.
Thanks for the quick and helpful response.
Last edited by SWBLS12B; 11-21-2007 at 10:10 PM.
1990 SWB 2000 5.3l 4l60e
It's in just tieing up the loose ends.
updated.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote