'91 chev. Reg. Cab SB. Frame off, escalade clip, ART F&R susp., SSBC rear disks, SSBC Force 10 front kit, Auburn LSD, '00 LS1 and 4l60e. Almost all done!
http://s57.photobucket.com/albums/g220/98hd/Chev/
You need a scanner to read the o2s. The black stuff may be due to detonation. Are you running 85 or 87 octane with the 91 octane tune? What condition are your knock sensors? A scanner will let you know if you're getting knock. Have you pulled the plugs and looked at them?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
'91 chev. Reg. Cab SB. Frame off, escalade clip, ART F&R susp., SSBC rear disks, SSBC Force 10 front kit, Auburn LSD, '00 LS1 and 4l60e. Almost all done!
http://s57.photobucket.com/albums/g220/98hd/Chev/
Didn't have alot of time so I only checked the # 1 and 2 plugs. Both were light gray on the tip and electrode.
These were also put in at the time of the swap, ngk tr55's
Here is a pic.
![]()
'91 chev. Reg. Cab SB. Frame off, escalade clip, ART F&R susp., SSBC rear disks, SSBC Force 10 front kit, Auburn LSD, '00 LS1 and 4l60e. Almost all done!
http://s57.photobucket.com/albums/g220/98hd/Chev/