That's a very complete looking kit. You'll need to fab a piece of steel to cover the old shifter hole. Slap some silicone on it before you screw it together and it will be water tight and bonded like it were welded in place.
That's a very complete looking kit. You'll need to fab a piece of steel to cover the old shifter hole. Slap some silicone on it before you screw it together and it will be water tight and bonded like it were welded in place.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote