I just got done doing my LS1 swap into my 98 v-6 1500. Its running nice and I'm just finishing up last minute things to get it back on the road. I have some questions I thought I'd throw out. Does anyone have a pinout for the passengers side under dash connector from the firewall? I'm sure it's the connector that has wiring for the fuel gauge as well as some airbag wires and the oil pressure gauge. If anyone has a pinout for this connector I'd really love you for life! I need to find the wires for the fuel gauge system and trouble shoot an airbag light and oil pressure gauge and i'm good!
I have been reading around some of the forums and had a question about the oil pressure. I was told by S&P that I should re-use my old oil pressure sensor and just us a thread adapter to match it up so my factory gauge still worked. Nelson's is telling me that I can't use my old oil pressure sensor because the VCM needs the input. Does anyone have any more info about this? The 5.7 and VCM are out of a 2002 camaro and I can't tell a difference in it running w/ one or the other sensor, other than I have a working oil pressure gauge w/ the right sensor! Thanks for any help!