Yeah I think the weep holes will definitely have to be done. I'll probably do it in the bottom of the elbow before it turns up toward the airbox. That was any moisture trapped int he pipe will run back down and seep out. Hopefully.

<div class='quotetop'>QUOTE(txarkitekt &#064; Mar 21 2007, 09&#58;04 AM) [snapback]86858[/snapback]</div>
Also, you might wanna put a 4" dia. filter half way up---maybe take a high-flo air filter you put in your house and cut it into a 4.25 dia. circle and shove it in there. That will help with cleaning your air filter so much---and you can replace that filter all the time---cause if you buy a 20"x20" filter, you can cut out 15 circles to make filters...

And (I can&#39;t tell by the pics) you probably might want to cover the hole with duct tape so you seal off the stock chamber to the fenderwell. The least amount of turbulence, the better. Speaking of turbulence... I may be retarded in saying/recommending this, but you could put one of those Tornado thingys in the tubing so you get that rotation effect which would smooth out the flow through the tubing...Just a thought...
[/b]
Missed a couple of your points - good idea on the filters, I may try that.

As for the openings going to the fenderwell, I duct taped them on both sides, so that eliminates air coming in from a different direction. And I don&#39;t think it&#39;s retarded - I half thought about doing some sort of fan or even the Tornado somewhere in the pipes. Out of sight of course&#33;