<div class='quotetop'>QUOTE(6gear &#064; Oct 25 2006, 12&#58;39 PM) [snapback]71070[/snapback]</div>
My truck was orginally a 4.8 5 speed and I went to the LS1 with a 6 speed and it was a very easy conversion. You can use the hydraulic line from your current setup and it will plug into the slave cylinder on the 6 speed, you crossmember should fit perfect with no mods you will just need a shorter driveshaft and lower gears in the back.
[/b]
I&#39;m glad you did this. We&#39;ve (Allen and I) been thinking about that exact swap for years and figured it would be a real easy swap. I always figured you could pick up a base model truck with a 4.8 and 5 speed for a good price and make a screaming hotrod truck out of it. Nice job&#33;