Guys i need some help. I just did my swap based off of this thread, but im having motor mount/frame mount issues. I have a 2006 single cab silverado 4x4 with the 4.3 and a manual 5 speed. I bought a 2003 5.3 engine. The motor is in my truck, mated to the transmission and i have the bolts in the passenger side frame mount. But my drivers side is not lining up. I used the v8 frame mount on the passenger side, and had to use my v6 motor mount on the drivers side for 2 reasons. 1, the v8 mount i have is made to mount flat, and my frame has the tubes on an angle, and 2; my tubes are longer then the v8 frame mount on the drivers side. So couldnt mount it even if i wanted to. This is a picture of what i have on the drivers side with the passenger side bolted up:

securedownload (1).jpg
securedownload.jpg