97 RCSB 6.0L + 4L80E + Procharger swap:)

[mattc]

Sweet build on the truck and congrats on getting everything up and running.Thanks for all the input with the Traction Bars. Do you have any more progress to add to this build thread? Are you running a 9" rear?

Yes i am running a 9" rear, right now the truck has been sitting for 2 months due to work, i got it on the battery charger now and hopefully i'll have some time to work on it, still having some fuel pressure problems but someone gave me a fuel rail with a regulator so i'm going to try that and see if that helps or fixes the problem i have now then i'll get back to working on logs for Nelson to do some more tuning!


also since you sent that PM i'll just put it here as well for anyone else who has the same question.

the heim joints i used were ordered from www.mcmaster.com here are the part numbers and which ones i used.

1 4444T501 2 Each Steel Ball Joint Rod End With Grease Fitting, 3/4"-16 Rh Male Shank,3/4" Ball Id,1-3/4"l Thrd
2 4444T502 2 Each Steel Ball Joint Rod End With Grease Fitting, 3/4"-16 Lh Male Shank,3/4" Ball Id,1-3/4"l Thrd
3 94640A365 2 Each Alloy Steel Tube-end Weld Nut, Fits 1-1/4" Tube Od,.120" Wall Thk,3/4"-16 Rh Thrd
4 94640A369 2 Each Alloy Steel Tube-end Weld Nut, Fits 1-1/4" Tube Od,.120" Wall Thk,3/4"-16 Lh Thrd