Quote Originally Posted by mattc View Post
well a small update, been waiting on a driveshaft to be made i kinda lost momentum we had a bad heat wave then some storms that took out my power tomorrow im going to jump on it again, but i have a few problems and i need some ideas on what to look for i have access to all data and the gm service site, i'm just not very good at electrical.

1. wont crank at all, no starter click no nothing.
2. when i turn on the lights they come on but my turn signal indicators come on in the dash as well and the turn signals dont work.
3. no brake lights.
4. i went from a 60E to an 80E and the shift linkage is just a bit off any remedy for this? IE when i put the truck in park the tranny arm needs to move another inch or so forward to hit park.
problems 2 and 3 are from a ground not being hooked up, on the truck harness there is one that comes out from the middle of the firewall area, for the linkage problems most people switch to floor shifters