i also have the DJM 4" drop and just got my caltracs today. I was going to make my own hanger but what are you doing with those calvert hangers then?
Quote Originally Posted by jetmech View Post
The only thing wrong with the hangers was the ride height. I currently have a DJM 2/4 drop which uses lower A-arms up front and shackles/hangers in the rear. When I pulled off the DJM hanger and monuted the caltracs hanger, the bolt hole was about an inch lower - which would have raised the rear of the truck about an inch. I found some belltech hangers that will work with the caltracs. I might have to modify them a bit bit they'll work. I'm thinking about doing a write-up when I go to install the caltracs with the new hangers.....