The kit cost is $275.00 shipped. It includes the brackets and hardware for the Alternator and A/C Compressor and a Tensioner Pulley. The entire kit uses Metric hardware that is 10mm x 1.5 thread pitch. The compressor bracket is powder coated and the alternator bracket is bare 6061 Aluminum. You will need to cut the "nubs" off of your 4 A/C compressor bolts and grind/file the "nub" off of your stock tensioner to allow the supplied pulley to fit. It does not come with a belt. A Gates #25061066 belt should fit. You can get the belt at your local auto parts store. There are at least 2 different Alternator and A/C compressor pulley sizes that might be on your setup. For that reason, it is really not feasible to supply a belt.

Jeff