Quote Originally Posted by conekiller01 View Post
First of all our trucks only have ONE cam not
multiple CAMS if yours has more than one you
might be on the wrong forum.....

And it's not that your springs and pushrods are
bad it's that with a new cam your springs will
more than likely be maxed out on their lift therefore
you need different ones that can handle the extra lift
hopefully this helps a little for ya
I do realize the truck has "one" cam but the term cams is speaking of multiple cam(s) available to buy on the market. I of course will only be buying one new one :0)! But thanks for all the information, its very helpful.

I guess I am asking because I called Comp Cams to asked about the best cam for my truck and they recommended the XFI Extreme Truck and I asked about replacing the springs and pushrods and the tech support guy says "It will just need a spring and retainer kit, but the pushrods will be fine". I am just trying to do it right the first time and get ALL the needed components.

As far as a stall goes... Any brand recommended and what range to get it in (rpm's wise) and costs? Keep in mind I am going for torque and low end more than maxing out the rpm's! I appreciate the help as I just joing this awesome site! I go hunting a lot and do use the highway and love to cruse at 80mph even though just makes me stop for gas more!