Here's a parts list and the pricing I paid. If anyone else needs it. Don't forget if your not takin the heads off you'll need an in car spring compressor I like the dual valve tool about $120 at Vinci. Also the Crane valve locks were on back order last time I checked you can have your supplier cross ref them with Comp Cams which tend to be more readily available.

Parts from Summit Racing
-Crane Valve Springs crn-144832 $160
-Crane Steel Retainers crn-144944 $66
-Trick Flow Push Rods 7.4 tfs-21407400 $87
-Crane Valve Locks CRN-99107 $33

Parts Store or Dealer
-Crank bolt $6
-Timing chain cover gasket set $40
-Valve cover gaskets $13

CAM
At Summit part # crn-1449561 it is priced at $468.95 can pick it up from Vincihiperformance.com for $405 known as the Trucker

Looking at about $800 to a grand. Depending on part cost and shipping in your location.

Ofcourse you'll need a tune to compliment your setup, that's up to you. I had mine dyno tuned at MTI Racing in Marietta Ga. If your in the GA area there is also Vengeance, Atlanta Performance and Dynolab that I know of. All located on the northside.