Quote Originally Posted by RedHeartbeat View Post
yeah, gage manufacturers make adapters for them. Contact Welcome to Street & Peformance , they have all of the ones you'll need if I remember correctly. I used an old Gen3 oil pressure gage and broke the top half off and drilled/tapped for my OBS pressure unit. Water temp adapter from hotrodlane. The last truck I did I tapped the water pump for the water temp sending unit, behind the tensioner in the flat area.
Bringing this thread back from the dead...

For the Oil Pressure i have an adapter fitting for the sensor located at the back of the block.
The water temp on the other hand, Does the Water Temp Sensor on the head have to stay there and another has to be drilled and tapped in order to have the truck (92 k1500) water temp gauge working?

Thanks in advance