I get asked all the time "how much to do a fuel system on my truck?"
Usually it's out reach because they cost so darn much.
I finished mine last year, and I'm selling it to a customer. I'm swapping to an LS style intake, vs the truck intake, so no need for this setup.
This setup is only the front half, you still need the big pump on the other end, fuel line, Y block, etc. Probably another $600.
Anyway, just wanted to share what you need if you do this.
Keep in mind, this setup will support over 1,000hp. I know some of you are thinking you don't have this setup and are pushing plenty of power, and it is possible, but this is how i do it.
casey, mic, jamest, etc, you guys know how this stuff adds up lol.
Pic is missing about $200 in fittings, those are on order.
FAST fuel rails: $209
Aeromotive Regulator: $140
-8an 180deg - 2 @ 23.95 - $47.90
-8an 45deg - 3 @ 14.95 - $44.85
-8an 90deg - 1 @ $16.88
-8 sump oring - 6 @ 9.25 - $55.50
-8 straight hose end - 2 @ 7.95 - $15.90
-6 180deg - 1 @ $22.95
-6 90deg - 1 @ - $14.99
-6 sump oring - 1 @ $7.95
6feet -8 hose braided - $52.88
3/8 -8 T - $114.99
5/16 to -6an - $34.99
-3 cap - $4.69
Reply With Quote