Well I just got back from testing, so here's the report...This stall drives just a tad bit looser then stock. But has alot more kick. I can brake stall it to about 25-2700 (stock tach says 25-2600 but has been about 1-200 off while scanning) . Now get this... flash stall, near as I can tell, is about 26-2800 but seems lower on the stock tach 24-2600, but I'm also assuming (sp.) it is also equally slow to swing to the RPM's. All in all I'm happy w/ it, especially w/ the 50 yrd. solid black marks I left before I had to get out of it cause I was headed for the ditch... Hey, I also want to thank you guys for the motivation and support. I probaly wouldn't have tried to tackle this myself w/o you guys help, so here's to you.