Originally Posted by
mean05
so you are talking about at the base where the elbow bolts to the intake....on one side it is already tapped on the intake itself for a vacuum line which i will use for the FPR till i get the new rails on there...so you are saying tap the base at the same place on the other side?
no, the port on the intake itself is for the brake vacuum line
this is at the bottom of the elbow maybe an inch from very bottom, there should be arectangular plate, this is where you drill and tap your elbow for necassary sensors and vacuum lines
Simple: 408 on steroids!
single digits coming soon!
Reply With Quote