Results 1 to 10 of 32

Thread: back to basics, RELAYS

Threaded View

  1. #1

    back to basics, RELAYS

    Need to double check something.

    This is about the most basic question you could ask but just to test my sanity...Im gonna ask anyway.

    The truck is a 96 gmc, a nelson harness with a 03 5.3/4l60e

    On the nelson harness, there is a fuel pump relay with four wires, three are embedded in the harness, one red wire is free and needs a home.

    We went to connect the red wire to the fuel pump, as it is the fuel pump relay ~ power.

    Before hand, we test the red wire, key on...

    Get NOTHING.

    The relay clicks with the key turned to on position....so we test....

    There are four wires on the relay. We tested as follows:

    orange...is getting constant power
    black.....ground
    green...gets switched 12v
    red....nothing
    again, there is an audible click when energized

    Correct me if I am wrong but this is a bad relay?

    This has been one source of confusion from day one, as we expected power at the red wire but didnt get it, we threw this question out to all parties involved but didnt get a response...I just want to clear this up, so we can move on.

    Thanks.





    .
    Last edited by LSXmyford; 08-15-2008 at 06:56 PM.
    LSX conversions, so easy a caveman can do it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts