Results 1 to 10 of 121

Thread: Hydrogen Kit

Threaded View

  1. #10
    ff_jeff Guest
    I have a tuned pcm from Nelson performance. Its a 93octane live tune. It is not tuned for the hydrogen, its tuned for nitrous, but i have no idea yet if you can or cannot tune for the HHO gas. But i am positive you dont HAVE to have a tuned pcm for HHO gas. Basically you have a cell that makes the HHO gas by electrolysis, then a cell that filters any steam, then a 3rd cell that's is a safety bubbler( so it doesn't back fire ) and another filter is in it, then an air dryer that takes any moisture out of the gas before to tap it into your intake manifold. I used a relay and some fuses, with a gauge to measure water level, and a toggle on and off switch. All wired to a ignition wire so it is never on while the ignition is off.
    Last edited by ff_jeff; 07-16-2008 at 01:16 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts