If you're going to tap the head then there is no need for an adapter, just tap it the same size as the water temp sensor. The adapter was so that you didnt have to drill the head, which is no problem either unless you make the tapped hole too large.
If you're going to tap the head then there is no need for an adapter, just tap it the same size as the water temp sensor. The adapter was so that you didnt have to drill the head, which is no problem either unless you make the tapped hole too large.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Posting Permissions
Reply With Quote