I'm putting a 5.3 in place of a tbi 4.3 in my 1991, I know I have to change to sbc mounts. Will these adapters work for what i need?
I'm putting a 5.3 in place of a tbi 4.3 in my 1991, I know I have to change to sbc mounts. Will these adapters work for what i need?
1991 c1500. 5.3l and 4l60e swap in progress, next paint and body.
Yep, that's what you need. They are available on Ebay for under $40.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
<div class='quotetop'>QUOTE(RedHeartbeat @ Jul 15 2007, 06:49 PM) [snapback]99545[/snapback]</div>Yep, that's what you need. They are available on Ebay for under $40.
[/b]
thanks, these are 75, looks like I will hit up ebay.
Brian
You will also need motor mounts and V8 receiver cups that bolt to the side of the engine block to do it right. Drop the lower a-arms out to get to the bolts to remove the V6 mounts.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I can just get the other parts at napa or autozone right? btw I just order the mounts for $40 thanks.
The mounts can be had at NAPA or pretty much any part store. The cups are pretty much a salvage or dealer item. They're cheap.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
<div class='quotetop'>QUOTE(RedHeartbeat @ Jul 15 2007, 07:21 PM) [snapback]99551[/snapback]</div>The mounts can be had at NAPA or pretty much any part store. The cups are pretty much a salvage or dealer item. They're cheap.
[/b]
thanks.
Posting Permissions
Reply With Quote