Caravan to Ennis - April 27th

[RedHeartbeat]

Time for a larger exhaust system or just a tune?

[PEDRO]

<div class='quotetop'>QUOTE(RedHeartbeat &#064; Apr 28 2007, 09&#58;00 AM) [snapback]91688[/snapback]</div>

Time for a larger exhaust system or just a tune?
[/b]

goin to put a cut out on it and get bigger injectors and get it tuned up again. I just went outside and one of my spark plugs wires was loose, just moved it a bit and the damn thing came off, pushed it in and the "exhaust leak" is gone. I guess i was only running good on 7? It sucks cause its the same wire that has come loose before

[RedHeartbeat]

Sounds like time to replace the wire.

[mean05]

i broked it again but this time it&#39;s the stall, looks like i get that 3,800 a little sooner then i wanted huh, but on the plus side i 1.77 60&#39; on motor and went 13.0 with barely on nitrous, i felt it when i hit it pulled hard then dropped off and that was it from there

[PEDRO]

virgil and blake
http://media.putfile.com/mean05-Virgil-vs-Fuzion-Blake

me
http://media.putfile.com/Pedro-42707

[DamnYankee]

Well that sucks Virgil...but I guess you were in the market for a new one anyway, so that&#39;s good. Maybe an Art Carr?

[mean05]

no going with a yank probrably

[PEDRO]

<div class='quotetop'>QUOTE(mean05 &#064; Apr 29 2007, 05&#58;54 PM) [snapback]91756[/snapback]</div>

no going with a yank probrably
[/b]

big spenda

[mean05]

your one to talk huh Pedro lol, i may have found a 3,600 PI for &#036;400

[RedHeartbeat]

I hope it&#39;s not as loose as my 3600 PI stall. If you get a chance, take a ride in the vehicle it&#39;s installed in currently. Mine&#39;s loose as a goose. At least get the serial number on the stall and call PI and ask how it&#39;s setup.